 |  |  |  |  |  |
260E 1987-1989, 300E and CE 1986-1992
W124 Stage 2 Cold Air Intake Kit
Complete stage 2 intake kit for all W124 chassis
vehicles up to 1992. Beautiful piping and heat
shielding. Filter exits below engine on passenger
side, piping is heat shielded near exhaust
manifold, and includes everything needed for
installation. Kit includes bypass valve as seen in
photos which prevents engine hydro-lock should
you drive through deep water. You have asked
for it and Wade Performance has delivered.
Summer Sale Price (email for price)
Kit is available as a special order only
W124 Stage 2 Cold Air Intake Kit
Complete stage 2 intake kit for all W124 chassis
vehicles up to 1992. Beautiful piping and heat
shielding. Filter exits below engine on passenger
side, piping is heat shielded near exhaust
manifold, and includes everything needed for
installation. Kit includes bypass valve as seen in
photos which prevents engine hydro-lock should
you drive through deep water. You have asked
for it and Wade Performance has delivered.
Summer Sale Price (email for price)
Kit is available as a special order only
2.6L 6 cylinder
1987-1992 BMW E32 Chassis 735I
and 735IL 3.5L M30 Engines
Stage 1
New release! Short ram intake kit utilizing thin
walled aluminum intake tube finished in a high
polish. The air filter is a true K&N high flow,
cotton gauze reinforced with corrugated steel
mesh. The filter is reusable so no more need to
replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox. Installation
instructions and hardware are included with
every kit.
Price $134.95 plus shipping
and 735IL 3.5L M30 Engines
Stage 1
New release! Short ram intake kit utilizing thin
walled aluminum intake tube finished in a high
polish. The air filter is a true K&N high flow,
cotton gauze reinforced with corrugated steel
mesh. The filter is reusable so no more need to
replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox. Installation
instructions and hardware are included with
every kit.
Price $134.95 plus shipping
M30 6 cylinder
190E 2.3L-16v and
2.5L- 16v Stage 1
The first available intake kits for the 190E 2.3L
and 2.5L 16 Valve Cosworth engines. This
intake utilizes the tried and true 3.0" OD thin
walled aluminum intake tube finished in high
polish. The air filter is a high flow, cotton
gauze reinforced with corrugated steel mesh.
The filter is reusable so no more need to replace
-- just wash, oil, and go using a filter charger
kit. This kit completely removes the large, heat
retaining, factory airbox and replaces it with a
high quality German manufactured intake boot.
Installation instructions and hardware are
included with every kit.
Price $149.95 plus shipping
2.5L- 16v Stage 1
The first available intake kits for the 190E 2.3L
and 2.5L 16 Valve Cosworth engines. This
intake utilizes the tried and true 3.0" OD thin
walled aluminum intake tube finished in high
polish. The air filter is a high flow, cotton
gauze reinforced with corrugated steel mesh.
The filter is reusable so no more need to replace
-- just wash, oil, and go using a filter charger
kit. This kit completely removes the large, heat
retaining, factory airbox and replaces it with a
high quality German manufactured intake boot.
Installation instructions and hardware are
included with every kit.
Price $149.95 plus shipping
2.5-16v JAPAN (1993)
2.5-16v JAPAN (1993)
190E 1984-1993 2.3L and 2.6L
Stage 1
The first in a line of performance air intake
modifications available for the venerable 190E 2.3L
and 2.6L. This intake utilizes a 3.0" OD thin
walled aluminum intake tube finished in chrome.
The air filter is a high flow, cotton gauze reinforced
with corrugated steel mesh. The filter is reusable
so no more need to replace -- just wash, oil, and go
using a filter charger kit. This kit completely
removes the large, heat retaining, factory airbox and
replaces it with a high quality German
manufactured intake boot. Installation instructions
and hardware are included with every kit.
Price $149.95 plus shipping
Stage 1
The first in a line of performance air intake
modifications available for the venerable 190E 2.3L
and 2.6L. This intake utilizes a 3.0" OD thin
walled aluminum intake tube finished in chrome.
The air filter is a high flow, cotton gauze reinforced
with corrugated steel mesh. The filter is reusable
so no more need to replace -- just wash, oil, and go
using a filter charger kit. This kit completely
removes the large, heat retaining, factory airbox and
replaces it with a high quality German
manufactured intake boot. Installation instructions
and hardware are included with every kit.
Price $149.95 plus shipping
2.3L 4 cylinder
2.6L 6 cylinder
190E 1987-1993 2.6L
300E 1986-1993 2.6L, 3.0L, 3.2L, 3.4L
(AMG models also)
Stage 1
The Stage 1 kit has been adapted to fit the high
power 6 cylinder M103 and M104 motor. This
intake utilizes a 3.0" OD thin walled aluminum
intake tube finished in chrome. The air filter is a
high flow, cotton gauze reinforced with corrugated
steel mesh. The filter is reusable so no more need
to replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox and replaces it
with a high quality German manufactured intake
boot. Installation instructions and hardware are
included with every kit.
Price $149.95 plus shipping
300E 1986-1993 2.6L, 3.0L, 3.2L, 3.4L
(AMG models also)
Stage 1
The Stage 1 kit has been adapted to fit the high
power 6 cylinder M103 and M104 motor. This
intake utilizes a 3.0" OD thin walled aluminum
intake tube finished in chrome. The air filter is a
high flow, cotton gauze reinforced with corrugated
steel mesh. The filter is reusable so no more need
to replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox and replaces it
with a high quality German manufactured intake
boot. Installation instructions and hardware are
included with every kit.
Price $149.95 plus shipping
300E 2.6L
1993 300E 3.4L AMG (Japan)
1993 300E Before
190E 260E 300E and CE 6 Cylinder
Distributor Cover and Ignition Wire
Holder
Now available are the OEM distributor cover and
wire holder for all 1987-1993 190E, 1987-1989
260E, 1986-1992 300E, 1988-1989 300CE,
1988-1991 300SE and SEL 6 cylinder engines.
OEM Black distributor cover $20.00
OEM Black Wire Holder $23.00
Wade Red Distributor Cover $30.00
Wade Red Wire Holder $33.00
Distributor Cover and Ignition Wire
Holder
Now available are the OEM distributor cover and
wire holder for all 1987-1993 190E, 1987-1989
260E, 1986-1992 300E, 1988-1989 300CE,
1988-1991 300SE and SEL 6 cylinder engines.
OEM Black distributor cover $20.00
OEM Black Wire Holder $23.00
Wade Red Distributor Cover $30.00
Wade Red Wire Holder $33.00
190E 260E 300E and CE Intake Kit
Heat Shield
Compatible with both the stage 1 and stage 1A
kits, it dramatically reduces intake tube surface
temperature and heat conductance through the
aluminum pipe. The kit includes all the stainless
steel hardware necessary to mount the barrier
material, thermal wrap, and a secondary
aluminized heat shield. Cleans up the appearence
of the engine bay. Intake kit sold separately.
Summer sale price $50.00 (Dealer Price)
Heat Shield
Compatible with both the stage 1 and stage 1A
kits, it dramatically reduces intake tube surface
temperature and heat conductance through the
aluminum pipe. The kit includes all the stainless
steel hardware necessary to mount the barrier
material, thermal wrap, and a secondary
aluminized heat shield. Cleans up the appearence
of the engine bay. Intake kit sold separately.
Summer sale price $50.00 (Dealer Price)
190E 1984-1993 2.3L
190E 1987-1993 2.6L
260E 1987-1989 2.6L
300E 1986-1992 2.6L & 3.0L
300SE & SEL 1988-1991 3.0L
Stage 1A
The revised design of the original Stage 1 air intake
has resulted in a very versatile kit with
applications to several engines and their
associated modifications. This intake utilizes a
3.0" OD thin walled aluminum intake tube
finished in chrome. The air filter is a high flow,
cotton gauze reinforced with corrugated steel
mesh. The filter is reusable so no more need to
replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox and replaces it
with a high quality German manufactured intake
boot with ports available for the mounting of the
air temp sensor. Installation instructions and
hardware are included with every kit.
Price $124.95 plus shipping
190E 1987-1993 2.6L
260E 1987-1989 2.6L
300E 1986-1992 2.6L & 3.0L
300SE & SEL 1988-1991 3.0L
Stage 1A
The revised design of the original Stage 1 air intake
has resulted in a very versatile kit with
applications to several engines and their
associated modifications. This intake utilizes a
3.0" OD thin walled aluminum intake tube
finished in chrome. The air filter is a high flow,
cotton gauze reinforced with corrugated steel
mesh. The filter is reusable so no more need to
replace -- just wash, oil, and go using a filter
charger kit. This kit completely removes the
large, heat retaining, factory airbox and replaces it
with a high quality German manufactured intake
boot with ports available for the mounting of the
air temp sensor. Installation instructions and
hardware are included with every kit.
Price $124.95 plus shipping
2.6L 6 cylinder
2.3L 4 cylinder
190E 1984-1993 2.3L
190E 1987-1993 2.6L
260E 1987-1989 2.6L
300E 1986-1992 2.6L & 3.0L
300SE & SEL 1988-1991 3.0L
Stage 1B
Another versatile kit derived from the Stage 1
intake boot with applications to several engines
and their associated modifications. This intake
again utilizes a 3.0" OD thin walled aluminum
intake tube finished in chrome. The air filter is a
high flow, cotton gauze reinforced element with
corrugated steel mesh framework. The filter is
reusable so no more need to replace -- just wash,
oil, and go using a filter charger kit. This kit
completely removes the large, heat retaining,
factory airbox and replaces it with a high quality
German manufactured intake boot with areas built
into the boot for modification to allow fitment of
OEM sensors. Installation instructions and
hardware are included with every kit.
Price $134.95 plus shipping
190E 1987-1993 2.6L
260E 1987-1989 2.6L
300E 1986-1992 2.6L & 3.0L
300SE & SEL 1988-1991 3.0L
Stage 1B
Another versatile kit derived from the Stage 1
intake boot with applications to several engines
and their associated modifications. This intake
again utilizes a 3.0" OD thin walled aluminum
intake tube finished in chrome. The air filter is a
high flow, cotton gauze reinforced element with
corrugated steel mesh framework. The filter is
reusable so no more need to replace -- just wash,
oil, and go using a filter charger kit. This kit
completely removes the large, heat retaining,
factory airbox and replaces it with a high quality
German manufactured intake boot with areas built
into the boot for modification to allow fitment of
OEM sensors. Installation instructions and
hardware are included with every kit.
Price $134.95 plus shipping
| 2.6L 6 cylinder shown with optional intake heat shield |
WADE PERFORMANCE
PRODUCTS
PRODUCTS